Citor: Manufacturers of reverse osmosis & associated water purification equipment
Enquiries
Phone: +61 9430 5566
Email: info@citor.com.au
Availability
| Model | Production Rate (LPH/LPD) | Kit Standard | + Clutch | Kit Automatic | Assembled Standard | Assembled Automatic | Price |
|---|---|---|---|---|---|---|---|
| 90 | 90/2000 |  |
|
|
Click here to enquire |
||
| 150 | 150/3600 | |
|
|
Click here to enquire |
||
| 200 | 200/5000 | |
|
|
Click here to enquire |
Dimensions
This data is a guide only - please contact CITOR to confirm dimensions.
| Model | Length mm |
Width mm |
Height mm |
Weight kg |
|---|---|---|---|---|
| 90 | Modular Style | 45 | ||
| 150 | Modular Style | 48 | ||
| 200 | Modular Style | 51 | ||
Engine Driven
90 - 150 - 200 litres/hr
Features
- High Pressure Pump with Clutch Fitted
- Jabsco Interpuppy Feed Pump - 12v or 24v
- Low Pressure Cutout - protects Feed Pump and High Pressure Pumps
- Pressure Regulating Valve & Gauge - dual scale
- Pre-Filter 20 micron + 5 micron Cartridge Filtration
- TDS Meter - for testing Fresh Waster
- Valve Assembly - delivers Fresh Water to tank or diverts either to bilge or overboard
- Valve Assemblies on Feed & Reject Lines - enables membrane cleaning & sterilization
- Mounting Brakcets - for Filters - Membrane Modules & Pressure Regulating Assembly
- Control Box
- Hose & Fittings etc. for connection with components
- Instruction Manual ( incl. installation, commissioning, maintenance procedures etc )
- OPTIONAL TDS Meter with Digital Display
Notes
- High Pressure Pump has an electromagnetic Clutch fitted - driven by Vee belt from the Main engine
- High Pressure Pump will require a Bracket - Aluminium or Stainless Steel - for Base Mounting - to suit Vessel layout + allowance for Vee belt adjustment.
- Optimum High Pressure pump speed = 1450rpm. Maximum pump speed = 1750rpm
- Lower pump speed = Lower fresh water product & vice versa
- Feed pump to be switched ON before activating the High Pressure pump
- Power Draw (approx.) = 3HP from Engine (during operation)
- 90 & 150 kits - can be upgraded to 200 KIT at a later time - with minimal plumbing alteration + additional Membran Module(s)
Genset Power
90 - 150 - 200 litres/hour
Features
- Feed Pump - standard is DAVEY Dynaprime
- High Pressure Pump - Motor Pump Set (see below)
- Membrane Modules: 90(1x) 150(2x) 200(3x)
- Low Pressure Cut-out to protect the Feed & High Pressure Pump
- Pressure Regulating Assembly with Gauge (dual scale)
- Pre Filter 20 Micron + 5 Micron Cartridge Filtration
- TDS Meter for testing of the Fresh water
- Valve Assembly on the Fresh water to deliver to the tank or divert to the bilge (or overboard)
- Valve Assemblies on the Feed & Reject lines to facilitate Membrane Cleaning & Sterilizing
- Mounting brackets for the Filters, Membrane Modules, & Pressure Regulating Assemblies
- Hoses & fittings etc for connection of the components
- Control box with Switch. This starts the Feed Pump with time delay for the HP Pump
- Instruction Manual for Installation, Operation, Maintenance & spare parts
Notes
- 90 or 150 KITS can be upgraded to a 200 KIT at a later date i.e. minimal plumbing alterations by adding Membrane Modules
Choice of...
Close Coupled: 1.8 KW Electric Motor with flexible coupling mounted on Powder-Coated Aluminium base. Overall dimensions (LxWxH) 600mm x 300mm x 270mm.
Direct-Mount I: 2.2 KW Electric Motor with the High Pressure Pump flange mounted. Overall dimensions (LxWxH) 500mm x 250mm x 270mm.
Direct-Mount II: 1.8 KW Electric Motor with Bell housing & CAT 271 SS Pump. Overall dimensions (LxWxH) 600mm x 300mm x 250mm.
Optional Extras
Soft Starter
Electronic device to limit starting current of electric motor - not necessary if Gen set is 6.0KVA or larger.
TDS Monitor
Salinity Monitor with digital display of Fresh Water quality - 12 V DC with 240 VAC Adapter 0 - 2000ppm TDS.